Australian company SPEE3D has successfully proven that its XSPEE3D technology for additive manufacturing of metal parts operates efficiently in extremely cold environments. As part of the U.S. Department of Defense’s “Point of Need Challenge” project, the company demonstrated that metal components produced in sub-arctic temperatures exhibit material properties comparable to those created under standard laboratory conditions.

The project aimed to assess manufacturing technologies capable of producing and repairing large metal parts in extreme climates. SPEE3D’s successful demonstration took place at the U.S. Army’s Cold Regions Research and Engineering Laboratory (CRREL) in Hanover, New Hampshire, at the end of 2023. The initiative was carried out in collaboration with the New Jersey Institute of Technology’s (NJIT) COMET project, Philips Federal, and the LIFT innovation platform in Detroit.

Gameto has achieved a historic milestone in reproductive health with the world’s first live human birth using Fertilo, a cutting-edge ovarian support cell (OSC) technology. The groundbreaking birth took place at Santa Isabel Clinic in Lima, Peru, and could represent a significant leap forward in fertility management.

Traditional in vitro fertilization (IVF) methods require women to undergo 10–14 days of high-dose hormonal injections to mature eggs. In contrast, Fertilo uses engineered, young ovarian support cells to replicate the natural egg maturation process outside the body. This innovative technology reduces the need for up to 80% fewer hormone injections compared to traditional IVF and shortens treatment cycles to just three days.

Japanese researchers have demonstrated that freeze-dried mouse sperm can remain viable on the International Space Station (ISS) for extended periods, producing healthy offspring despite exposure to space radiation levels 100 times higher than Earth’s.

Led by Professor Teruhiko Wakayama at the University of Yamanashi, the research shows promise for preserving genetic materials in space long-term. The team’s freeze-dried sperm, stored on the ISS for nearly six years, successfully produced healthy “space pups” with no genetic abnormalities.

Research reveals biomethane as a promising alternative to natural gas in ammonia production, offering potential carbon negativity while maintaining compatibility with existing infrastructure.

Environmental engineer Aurelian Istrate’s research demonstrates that biomethane, derived from food waste and agricultural residues, can replace natural gas in ammonia synthesis. Unlike natural gas, biomethane’s carbon emissions are offset by recent atmospheric CO2 capture during biomass growth.

Scientists at Penn State have demonstrated precise control over material properties through “atomic spray painting” of potassium niobate using molecular beam epitaxy (MBE). The technique, detailed in Advanced Materials, allows for exceptional control through strain tuning—modifying a material’s properties by manipulating its atomic structure.

The team achieved a first by growing potassium niobate using MBE, which deposits atomic layers onto a substrate. By creating strain through template-guided growth, they enhanced the material’s ferroelectric properties. Even a 1% strain produced pressure effects impossible to achieve through external forces.

Climate change is causing widespread bleaching and death among the world’s coral reefs due to rising sea temperatures. In response, Dr. Benyamin Rosental of Ben-Gurion University of the Negev and his team have proposed an innovative potential solution: transplanting stem cells from resilient corals to revive vulnerable ones.

In a recent paper published in Cell Reports, Dr. Rosental, along with Shani Talice and their colleagues, demonstrated for the first time the feasibility of transplanting stem cells into sea anemones, close relatives of corals. Their research showed that stem cells from hexacorallia (Nematostella vectensis) successfully integrated, differentiated, and proliferated in transplanted individuals.

A Sweden-based company, Novatron Fusion Group, has launched the TauEB project, an innovative initiative aimed at achieving commercially viable fusion energy. By revolutionizing plasma confinement and energy containment techniques, the project seeks to position fusion power as a competitive and sustainable energy source.

The TauEB project introduces a groundbreaking integration of three physical confinement techniques: Magnetic Confinement, Ambipolar Plugging, and Ponderomotive Confinement. This combination marks a first-of-its-kind approach to improving plasma stability and energy retention in fusion reactors.

Green hydrogen is often proposed as a climate-friendly alternative to natural gas for energy production. However, the infrastructure for a green hydrogen economy is still in its infancy and may take years to fully materialize, if it happens at all. To bridge this gap and sustain small natural gas power plants in the interim, the German Aerospace Center (DLR) and power-plant service provider Power Service Consulting (PSC) have tested micro-turbines capable of running on hydrogen, natural gas, or a combination of both.

Peter Kutne, head of the Gas Turbines Department at the DLR Institute of Combustion Technology, emphasized the cost and time benefits of retrofitting gas turbines for hydrogen compatibility. Building a new 15-megawatt gas turbine power plant typically requires six years and costs approximately $31 million (€30 million). In contrast, retrofitting an existing plant takes just 1.5 years and costs about a tenth of that amount.

Researchers at Nanyang Technological University in Singapore have unveiled a groundbreaking machine capable of transforming ordinary cockroaches into remotely controlled cyborgs. This innovative device equips each cockroach with portable stimulation and communication electronics in just 68 seconds, a significant improvement over traditional methods that require up to 30 minutes and specialized skills.

The “cyborgized” cockroaches are fitted with an electronic “backpack” that enables remote control through electronic stimulation of their antennae. By stimulating either the left or right antenna, researchers can influence the cockroach’s direction. Unlike earlier techniques that demanded manual precision, the newly developed machine automates the process, paving the way for large-scale production of these enhanced insects. The researchers claim this process is harmless to the cockroaches and can potentially scale to produce hundreds or even thousands of cyborg cockroaches on demand.